S3088 CCI – AOI

Conformal Coating Inspection


Reliable conformal coating inspection - powerful and precise

  • Precise detection of defect sites
  • Robust short-cycle inspections
  • Easily adaptable to various conformal coatings
  • Fast inspection program creation
  • Dependable DMC and OCR reading
  • Angled views for reliable inspection of/on component leads
  • Wet inspection enables a check before conformal coating cures
  • Highly precise inspection of plasma and nanocoatings with HighDensity camera module
  • Layer thickness inspection (3D Spot Measurement)
  • Maximum inspection program optimization through integrated verification
  • Global libraries, global calibration: Transferability to all systems
  • Traceability, SPC, verification, off-line programming and much more
  • Complete compatibility with S3088 system family
  • Customer-specific software adaptation
  • User interface in nearly every language
  • Complete statistical process analysis
  • Independent real-time image processing with Viscom analysis tools
  • High-performance OCR software
  • Over 30 years of AOI experience included
  • Freely configurable interfaces to connect various modules
  • Communication with MES systems
  • Label printers and bad board markers control
  • Intelligent FIFO buffer
  • Preparation, storage and printing of error logs
  • Flexible single- and multi-line utilization of the verification and repair station
  • Management monitoring through Viscom SPC
  • User-friendly real image display providing a better verification
Cracks, coating voids, completeness, smears, splashes
Dry inspection, wet inspection (optional)
Camera technology
Orthogonal camera module 8M
(white and UV LEDs)
HighDensity moduleAngular view camera module 8M
(UV LEDs) (optional)
Field of view57.6 mm x 43.5 mm
(2.3" x 1.7")
20 mm x 20 mm
(0.8" x 0.8")
Resolution11.75 μm12.75 μm8 μm
Number of megapixel cameras414/8 (optional)
3D Spot Measurement
Vertical range0 - 15 mm Z-axis
Inspection range30 - 500 μm (other values optional)*
Resolution250 nm
Field of view (diameter)20 μm
Repeatability of
height evaluation
< 5 μm @ 3 σ on coating material (100 μm acrylic resin sample)*
User interfaceViscom vVision/EasyPro
SPCViscom SPC (statistical process control), open interface (optional)
Verification stationViscom vVerify/HARAN
Remote diagnosisViscom SRC (optional)
Programming stationViscom PST34 (optional)
System computer
Operating system Windows®
ProcessorIntel® Core™ i7
PCB handling
PCB dimensions508 x 508 mm (20" x 20")
Transport height900 - 950 mm ± 20 mm (35.4" x 37.4" ± 0.8")
Width adjustmentAutomatic
Transport conceptSingle track transport
PCB clampingPneumatic
Upper transport clearance50 mm (2")
Lower transport clearanceUp to 60 mm (2.4")
Inspection speed
8M/HighDensity20 - 40 cm2/s*
3D spot measurement0.6 s per FOV*
Other system data
Positioning/handling unitSynchronous linear motors
Power requirements230 V (other voltages on request), 1P/N/PE, 10 A, 4-6 bar working pressure
System dimensions994 mm x 1565 mm x 1349 mm (39.1" x 61.6" x 53.1") (W x H x D)
Weight600 kg (1323 lbs)


*Specification may vary by coating material – please do not hesitate to contact us for individual evaluation.

Zur optimalen Darstellung der Webseite muss Javascript in Ihrem Browser aktiviert sein.